ADVASCO SCALES LTD

PHONE: (09)-835 2480     EMAIL: info@advasco.co.nz
FOR SALES, SERVICE AND SOLUTIONS

Fork Hoist Scales

  • Checkweigh pallet loads
  • Simple to use - push button with built in rechargeable battery
  • Simple to fit - install suitable T section (not supplied) into hydraulic ram supply hose and plug in scale!
  • Suits most hoist types

The WEIGHSAFE 805 incorporates a micro-processor based unit connected to the hydraulic lifting system found on lift trucks or similar machines. A load is placed on the forks and is then accurately weighed by measuring the hydraulic pressure required to raise the load. An electronic sensor measures this pressure. An accuracy of +/- 1 to 2% of the lift truck capacity is typically achieved. Designed for heavy industrial use, the lift truck can weigh a load in less than 5 seconds. This will ensure your shipments will not exceed trailer/truck capacity. Individual weight is displayed as a fixed reading, for up to 6 – 8 seconds when the WEIGH key is pressed, using the unique DIGI-LOCK software.

The WEIGHSAFE 805 will also totalise both weight and number of lifts performed, which are also available on simple recall.

It is an ultra slim, weatherproof, micro-processor based digital weight indicator with a 15mm LED display featuring rare weight, lock and hold, accumulative weight, number of lifts and printing functions. It uses specifically designed DIGI-LOCK forkift weighing software.

 

Features

  • Easy to read/user friendly
  • Selectable digital filter
  • Selectable capacity and division sizes
  • Totalling function for weight accumulation
  • Display total number of weighings performed
  • 3000psi sensor
  • Clear and stable LED display
  • Automatic zero tracking
  • Splash-proof case
  • Zero/Tare function keys
  • Full digital calibration and function setting method
  • 12 volt dc operation
  • External Dimension (220mm L x 160mm H x 85mm D) inludes mounting bracket
  • 72\48\36\24 volt dc to 12 volt dc invertor with in-line voltage suppressor
  • Canopy mounting bracket
  • Weather shield

 

Specifications

Construction Material Enclosure 304 Stainless Steel
  IP - 65 Rating
H44 operating range 10°c to 50°c (14°F to 130°F)
Display Digits 6 digit 15mm segmented red LED
Power/Voltage 12 volts dc exceeds automotivepower supply transient suppression specifications
Sensor Rated Pressure - 3000psi Burst Pressure 15,000psi
  Construction: 17-4 Stainless Steel Operating temp range: 10°c to 60°c ( 14°F to 140°F ) Cable length: 1.5 metres

 

The Weighsafe 805 System contains the following components:

Weight Weighsafe 805 system (2kg) - Shipping Weight
Dimensions 240mm L x 150mm D x 210mm H - Shipping Dimensions
Warranty 12 Months limited warranty on components only

 

  • Weighsafe 805 Indicator with mounting bracket
  • 3000psi sensor
  • Power cable with in-line fuse protection 1.5 metres in length
  • Hydraulic fittings including, 1/8 Bsp to 7/16 Jlc adaptor fitting, 1/2 metre Hydraulic hose
  • Operating stickers and operating information, including manual
  • Specifications and features subject to change without notice.

 

ADVASCO SCALES LTD.     PHONE: (09)-835 2480     EMAIL: info@advasco.co.nz
We are an NZ company who specialises in weighing and weight measurement using weigh scales, including new scales, used scales, second hand scales and old scales. We handle every kind of scale repairs, scale hire and scale calibration.
Key words
Auckland Calibration of scales NZ New scales Old scales Used scales Second hand scales Scale repairs Scale hire Scale calibration Solas Weighing Weight measurement Weigh scales Verified Gross Mass VGM